九九久久久久99精品_日韩一区二区在线免费观看_综合国产第二页_精品免费二区三区三区高中清不卡

簡介：今年早些時候在迪拜舉行的一場題為“地面設備：提升產量、節能、CO2 減排以及水管理效率”的SPE應用技術研討會，該會議主要討論了地面設備效率提升方面的一些新進展。來自25個公司和國家的50余位與會者討論了油水氣分離、節能與排放，以及廢物管理方面的話題。
Innovations aimed at improving efficiencies in surface facilities were the focus of a SPE Applied Technology Workshop (ATW) titled “Surface Facilities: Improving Efficiencies in Production, Energy Conservation, CO2 Reduction, and Water Management” and held earlier this year in Dubai. More than 50 attendees from 25 companies and 16 countries reviewed the challenges of oil/water/gas separation, conservation, emission, and waste management in the backdrop of increasingly stringent regulatory requirements.

Abbas Ahmed Yousef, field manager for Adco’s Bab field, opened the ATW with his keynote addressing the means to improve surface-facility efficiency, emphasizing the need for operators to adopt more enhanced oil recovery (EOR) techniques to improve production efficiencies. He also touched on the importance of energy conservation and emissions and waste management, particular as producing fields mature. He then commended the organizing committee and Cochairs Shaker Faras of Kuwait Oil Company (KOC) and Bert van den Berg of Shell for organizing the five workshop sessions to be aligned with the different stages of a project’s life cycle.

Oil/water/gas separation and handling 

In the ATW’s first session, Ahmed Abdulmajeed of Saudi Aramco discussed process enhancements in gas/oil separation plants within his company. He reviewed how a new mixing valve for wash water going to desalters was able to reduce wash water consumption from 50 to 30 gallons per minute, resulting in more than 10 million gallons of water savings over a one year period. He also discussed how the implementation of a smokeless, high-pressure air-assisted flare system, which employs a new flare tip design and additional flare tip shield, provides for better gas combustion. Saudi Aramco is also testing an in-line water separator which promises to remove approximately 70?80% of water without the need to treat in a gas/oil separation plant and with quality in the range of 22?35 ppm of oil in water.

Alexander de Kruijf of Petroleum Development Oman (PDO) next discussed the pitfalls of improper oil and gas sampling and made predictions on future process equipment design. Inaccurate measurement of H2S in one PDO application led to deteriorating sales gas quality, with H2S concentrations reaching 5 ppm. The result was 4 months of deferment equivalent to approximately 100,000 BOPD. To prevent acid corrosion in equipment, de Kruijf stressed the importance of routinely measuring for organic acid, using corrosion-resistant alloys with increased corrosion allowances, and implementing organic pH neutralizers. In general, he advised that production chemistry programs should be an integral part of a project’s process.

Oliver Garnier of Total reviewed a strategy to maintain production from his company’s mature Abu Al-Bukhoosh field. The field has been producing since 1974, and present production is 15,000 BOPD with an average basic sediment and water (BS&W) of 86%. By implementing improvements including increasing the impeller size in the gas recovery compressor, closing wells with too high a BS&W, optimizing well productivity by using multiphase flow-meters, and implementing deemulsifier injection with gas lift, Total managed to level the oil production potential to above 16,000 BOPD since 2007.

Applying advanced engineering tools, methodologies 

Session Keynote Speaker Colin Fairweather of AMEC presented his company’s experience with the fully integrated engineering system, which links an electronic version of a processing plant with its real-world counterpart. At every stage of a project, the system electronically adds data and deliverables to the project database. “Fully integrated engineering systems provide an environment which enables the collaboration of all parties and applications, even from multiple locations, in a safe, efficient, and effective manner,” Fairweather said.

Saudi Aramco’s Mishaal Alhetairshi discussed the latest trends in instrumentation design. Alhetairshi said that the financial performance of an existing production facility can only be improved by optimizing the performance of the plant’s distributed control system, a system that typically may control up to 75% of a plant’s equipment. He also stressed the dramatic growth of wireless instrumentation and control, and noted that while security and reliability concerns persist, wireless systems are lowering infrastructure costs and providing greater flexibility in integrating and managing both green- and brownfield projects.

Amjad Elabed of Adco reviewed his company’s initiatives in well clustering and flowline and facility corridoring projects. He stressed the benefits of corridoring, including decongestion, enhanced safety, fewer drilling deviations, improved hydraulics, and overall better integrity management of the pipeline network. Placing flowlines in corridors also reportedly provides a concerted manner for combating sand movement. To overcome the corrosion due to sand movement in flowlines, Adco uses cathodic protection on wells, and isolates the wells from flowlines via shutdown valves located approximately 100 m from the wells. He mentioned the benefits of clustering of wells, including providing shorter distances for rig transport, an improved means of introducing new technology, and better preparation for future artificial lift operations.

Reducing CO2, other emissions 

The ATW’s third session focused on improved energy conservation efforts to reduce the generation of CO2 and other emissions. Keynote Speaker Mohammed Al-Fodari of KOC discussed many of the initiatives his company have implemented to reduce emissions in their facilities, and highlighted that KOC has achieved a reduction in the amount of produced gas flared from 13.91% to 4.35% during the period 2002?2009.

KOC’s Fatima Abdali then discussed the company’s strategy for carbon management, saying that a pilot study is planned to investigate using CO2 for EOR operations. She said that the first stage will focus on acquiring a source of CO2 for the EOR trials, and that CO2 capturing technologies for KOC’s own processes has yet to be explored.

Optimization of energy consumption in plants was the topic of the next two presentations. Anne Rocher of Total said that plans for improving energy efficiency should commence during a project’s conceptual stage with the inclusion of energy efficiency indicators and multidisciplinary energy reviews that incorporate best practices recommendations. Energy efficiency plans for existing plants should include detailed benefits of the new plan, a thorough implementation plan, and an impact analysis for each site. Montaser ZamZam of Adco reiterated these points, adding that typical areas of energy waste for all plants should be clearly identified up-front and that successful optimization of energy usage will only come with commitment from all players.

Waste management 

In addressing new developments in water treatment and oil recovery, Keith Robinson of Oil Plus first reminded attendees of the driving forces for new water treatments, namely increasing water cuts, challenging new fields, tighter supplies of water, and more stringent environmental requirements. He highlighted the importance of advances in filtration system technology, particularly related to seawater nanofiltration for sulfate removal, seawater deoxygenation, and seabed treatment of injection water.

Ahmed Nabi Hasan of KOC reviewed his company’s experience with bulk handling of treatment chemicals and expressed several benefits over handling of chemicals in drums. KOC has experienced a reduction in chemical exposure to individuals when moving chemicals in bulk, as well as less spillage, reduced operating and disposal costs, and more streamlined chemical delivery logistics.

Dalal Al-Whaib of KOC discussed the latest Health, Safety, and Environment (HSE) practices in the engineering and design phases of a project. She stressed that HSE issues must be captured at a project’s earliest stages to avoid costly and time-consuming variation orders. Key issues to consider can include an environmental impact assessment; a risk management plan; a project behavioral safety plan; and studies on fire/explosion risks, noise effects, and smoke/ventilation factors. The major challenges to effectively managing these HSE practices at a project’s initial stages include obtaining strict compliance from contractors, in Al-Whaib’s opinion.

Ahmed Al Quraan of the Bahrain Petroleum Company presented his company’s centralized sludge treatment facility (CSTF) as a cost-effective means to ensure compliance with stringent environmental regulations. The CSTF takes sludge from various oilfield sources and processes it to yield solids that are suitable for disposal in a municipal facility or landfill. The recovered oil is suitable for routing directly to slop tanks, while the recovered water can be routed to the waste water treatment plant for further processing. Al Quraan said that the CSTF’s cost of USD 10 million made it an attractive option versus conventional cleaning, transporting, and controlled disposal processes.

Plant monitoring, maintenance strategies 

Corrosion monitoring and mitigation in KOC was the topic of Hasan Sabri’s presentation, in which he stressed the importance of both internal and external corrosion monitoring and corrosion mitigation measures that encompass material selection, chemical injection, coatings, and cathodic protection. Ghassab Fahad Al-Ajmi of KOC then reviewed the company’s experience with risk-based inspection in process plants, stating that 20% of the plant equipment commonly carries 90% of the total risk. Common risks include damage mechanisms such as CO2- or H2S-induced corrosion, microbial-induced corrosion, internal erosion, and corrosion under insulation. KOC uses the Orbit-Onshore software to forecast risk for a facility’s equipment and piping, and gives inspection priority to equipment with medium to high risk.

The final presentation was a case study of Abu Dhabi Marine Operating Company’s in-situ chemical cleaning technique for a heat exchanger at its Zakum West facility. The company’s Ramesh Nagarajan said that significant fouling in the heat exchanger due to using seawater as the cooling media necessitated the cleaning job. An in-situ technique using carboxylic acid was chosen which required fewer resources, provided less HSE risks, and was more cost-effective compared to conventional hydro-jet cleaning. To avoid the problem of fouling in new plants, the company will use air coolers.

楊寶劍 是振威（全球）石油網的高級技術編輯，在石油技術資訊行業有八年的學識和經驗。他源源不斷地提供石油行業全球最新的技術創新、研發成果、現場應用情況等信息。如果你對該項新技術有任何的疑問，或者對“新技術新產品”未來的內容有任何問題或建議，請聯系楊寶劍編輯 +86 10-58236512 Email：allenyo@zhenweiexpo.com 歡迎與行業互動！